| |
|
 |
School of
Agriculture and Natural Resources
|
Course
Outline for AGEN 120
Water
Supply and Sanitation
Spring
2008
WebCT
Access of Course Material On-line (for students enrolled in the course)
INSTRUCTOR:
| Dr.
Walid H. Shayya |
Instructor
Contact Information
|
GENERAL
COURSE DESCRIPTION:
AGEN 120 covers
the basic concepts of water supply and sanitation. The course is
introductory in nature and attempts to provide a basic review of some of the
disciplines that have specific applications in water supply and
sanitation. In addition, there will be some focus on the development of water sources, the selection and installation of
pumping equipments, and water treatment. The laboratory emphasizes the hands-on
approach for demonstrating concepts. Also, there is emphasis on using
spreadsheet and computer programs that allow the students to solve basic and
advanced problems without having to be bogged down in mathematical computations.
EXPECTED
COURSE
OUTCOMES:
At the
successful completion of AGEN 120, the student is expected to have:
-
Gained an
appreciation for the importance of water for individual health and the
success of society.
-
Utilized
spreadsheet and computer programs in solving hydraulic problems that
relate to water supply and sanitation.
-
Understood
the principles and operation of water pumps and domestic water supply
systems.
-
Understood
water quality issues as they affect homes and businesses.
-
Developed a basic
understanding of the principles and operation of on-site wastewater
treatment systems.
-
Understood
the principles of operation of common wastewater treatment facilities.
OFFICE
HOURS:
The instructor
has the following designated office hours per week:
-
Mondays:
1:00 to 1:50 p.m.
-
Tuesdays:
9:00 to 9:50 a.m.
-
Wednesdays:
10:00 to 10:50 a.m.
-
Thursdays:
10:00 a.m. to 11:50 a.m.
If necessary, students are also encouraged to make appointments to see
the instructor at other times. Students with disabilities who
require accommodations to fully-participate in the course activities
are requested to contact the instructor within the first two weeks
of the semester.
CONTACT
HOURS AND CLASS SCHEDULE:
AGEN 120 is a
two-credit hour course. It includes three contact hours per week (one
for lecture and two for the laboratory). One section of the lecture
and one section of the laboratory are offered. The schedule of the offered sections is as
follows:
-
AGEN 120 -
Section 1 (lecture): Meets on Tuesdays (10:00 to 10:50 a.m.) in Room
207, Bicknell Hall.
-
AGEN 120 -
Section 01L (laboratory): Meets on Tuesdays (11:00 a.m. to 12:50 p.m.) in
either 208 Bicknell Hall or 121 Wood Technology Building (please refer to
the outline of laboratory topics).
TEXTBOOK:
A course manual
is available from the campus bookstore. It includes the
instructors PowerPoint presentations (printed in handout format), pertinent reading material,
and all of the laboratory exercises. The following textbook will serve as
a reference and may also be purchased from the campus bookstore:
Hammer, M.J.
and M.J. Hammer.
2007. Water and Wastewater Technology (6th
edition). Prentice Hall, New Jersey.
REQUIRED
MATERIAL:
A scientific
calculator is required.
CLASS
POLICIES:
-
Attendance:
First and foremost, students must always plan to be in class on time. Given the nature of the course, all students are
also required to attend all classes
and laboratories. Attendance will be taken during each class session and
appropriate actions will be taken when students are absent for more than 20%
of the course. Very few or no absences will be considered during the grading
process when the student is close to receiving the next higher letter grade.
No make-up examination will be given without a written medical excuse, family
emergency, or prior permission from the instructor. Students are responsible
for all material covered in the class whether presented orally during the
lectures (and laboratories) or assigned.
-
Student Behavior:
As students in a technical program are preparing for a professional career, all students are expected to conduct themselves as professionals (in both manner and dress).Good
behavior in the classroom is expected from all students. Students who
engage in unacceptable or disruptive behavior will be asked to leave the
class.
-
Eating, drinking, or the consumption of any tobacco products is prohibited in the classroom situation (lecture hall, classroom, laboratory, or field). Doing so may result in the student's dismissal from that class period and will count as an unexcused absence.
-
Cell phones and pagers must be turned off during instruction time. Use of or disruption of class by these devices will result in the student's dismissal from that class period and will count as an unexcused absence.
Laptop computers may not be used during the lecture.
-
Assignments:
This course will include several assignments. At the end of the semester, the
one assignment with the lowest grade will be dropped for each student.
However, a student missing an assignment will receive a grade of zero on that
assignment, although this grade could be dropped if the assignment is
considered to be the one with the lowest grade. Class assignments will account
for 25% of the final grade. Therefore, it is important that students complete
their assignments accurately, neatly, and on time. Assignments received past
the due date will be devalued 5% for each day that the item is late. No class
assignment of any student will be graded (for credit) once the same assignment
is corrected and returned to the class.
-
Examinations:
Class examinations will cover class and laboratory material, homework and
Laboratory assignments, and assigned readings. A study guide will be
provided for each exam.
-
Honesty Policy and Discipline (Due Process):
Honesty and integrity are major elements in professional behavior and are expected of each student. Any assignment (including those in electronic media) submitted by a student must be of the student's original authorship. Representation of another's work as the student’s own shall constitute plagiarism. Cheating, in any form, is an unacceptable behavior within all College courses. Students having academic problems should consult with their academic advisor or a college counselor. Instances of cheating will be dealt with in accordance to College policy. Standards of academic honesty and due process procedures for Morrisville State College are located in the Rules, Regulations, and Expectations section of the Student Handbook.
-
Safety Guidelines:
Certain class assignments may require the student to be absent from the professor's immediate supervision. Whether the student is under immediate supervision or not, safe conduct and safe use of equipment shall be the ultimate rule. Failure to comply with prudent safety practice and/or willful disregard for class participants and/or equipment may be cause for immediate dismissal from that particular class session by the professor(s). Subsequent similar activity may be cause for dismissal from the course by the Dean.
-
Things
to remember: The nature of the topics covered in AGEN 120 will require a
consistent effort from each student (understanding earlier lectures and
laboratories will be critical to grasping concepts presented in subsequent
lectures and laboratories). Given the course's focus, students are also
urged to spend the time in completing laboratory exercises and course
assignments on time (and independently). Completing assignments well before
the due date will give the student a chance to ask questions should s/he
encounter problems. Students also should remember to ask questions of the
instructor when they face difficulties, whether inside or outside the
classroom. The instructor has an open-door policy and welcomes the opportunity
to visit with students whenever needed.
GRADING/EVALUATION
OF STUDENT:
Evaluation is a shared responsibility between the teacher and the student. The purpose of the evaluation is to demonstrate how well the professor has taught and the student has learned specific course materials, the principles, concepts and terms relevant to the covered topics, and to determine the students' ability to apply that knowledge to specific situations.
The breakdown of grading
in this course will be as follows:
-
Class
Participation, Attendance, and Work Ethic ==> 5% of final grade
-
Laboratory
Exercises and Homework Assignments ==> 25% of final grade
-
Two Progress
Examinations
==> 30% of final grade
-
Term Project ==> 15% of final grade
-
Final Examination
(comprehensive) ==> 25% of final grade
The
distribution of grades in this course will be based on the A-F
College grading scheme. The letter grades correspond to the
following percentage scale: A (90-100%), A- (87-89.9%), B+
(83-86.9%), B (80-82.9%), B- (77-79.9%), C+ (73-76.9%), C
(70-72.9%), C- (67-69.9%), D+ (63-66.9%), D (60-62.9%), and F
(<60%).
OUTLINE
OF TOPICS:
|
Week
|
Lecture Topic*
|
Textbook
Chapter
|
| 1 |
Course
outline
Outline of term project |
Outline
Handout |
| 2 |
Water
and water sources |
1 |
| 3 |
Overview of basic units |
4 |
| 4 |
Water
pressure
Pressure-velocity-head relationships |
4 |
| 5 |
Closed
pipe flow
Review of the study guide of the first exam |
4 |
|
6 |
First
class examination |
|
|
7 |
Pumping
fundamentals, affinity
laws, pump curves, and system characteristics curves |
4 |
|
8 |
Power
requirements of pumps
Gravity flow in pipes and introduction to open channel flow |
4 |
| Week
9 - Spring Break (No classes) |
| 10 |
Groundwater
hydrology
Gravity and confined wells |
4 |
| 11 |
Surface
and ground water
quality |
5 |
|
12 |
Chemical
and microbiological quality of drinking water
Review of the study guide of the second exam |
5 |
|
13 |
Second
class examination |
|
|
14 |
Domestic
wastewater flows and characteristics |
9 |
|
15 |
Municipal Wastewater
Treatment systems |
10 |
|
16 |
Review
of sewage treatment options
Review of the study guide of the final exam |
Handout |
|
Final Examination (comprehensive) |
|
Week: Date
|
Laboratory Topic (Location)*
|
| 1:
Jan.
22 |
Introduction
to Microsoft Excel (208 Bicknell Hall) |
| 2:
Jan.
29 |
Selection
of water
supply pipes and fittings (121 Wood Tech. Building) |
| 3:
Feb.
5 |
Cutting,
threading, and soldering pipes (121 Wood Tech. Building) |
|
4: Feb. 12 |
Static head
problems (208 Bicknell Hall) |
| 5:
Feb. 19 |
Pipe
friction and sizing problems (208 Bicknell Hall) |
|
6: Feb.
26 |
Sizing
pumps and pressure tanks for domestic water supply systems (208 Bicknell) |
|
7: Mar. 4 |
Common
pumps
and pressure tank types (121 Wood Tech. Building) |
|
8:
Mar.
11 |
Open
channel and gravity flow in circular pipes (208 Bicknell Hall) |
| Week
9 - Spring Break
- No classes |
| 10:
Mar.
25 |
Well hydraulics (208 Bicknell Hall) |
| 11:
Apr.
1 |
Storm runoff
(208 Bicknell Hall) |
| 12:
Apr.
8 |
Water
treatment of farmstead and rural home water systems (208 Bicknell Hall) |
| 13:
Apr.
15 |
Site appraisal for onsite wastewater disposal (208
Bicknell Hall) |
| 14:
Apr.
22 |
Overview of individual residential wastewater systems (208
Bicknell Hall) |
| 15:
April 29 |
Water
and wastewater treatment facilities at Morrisville State College |
| 16:
May
6 |
Term project completion |
*The
topics and corresponding dates listed in the tables above are
tentative and may be subject to change during the semester. |